Natural UHMW Rod

(No reviews yet) Write a Review
$10.38 - $1,990.00
Frequently bought together:

Description

These standard-grade UHMW polyethylene rods are wear- and impact-resistant and withstand scuffs, scrapes, and strikes. They provide good electrical insulating properties, moderate mechanical strength and stiffness, and excellent machinability. They have a low-friction surface that prevents sticking and binding, and are commonly used for food-handling applications, conveyance mechanisms, material handling, and packaging where wear resistance and durability are required.

  • High-impact strength (will not break or shatter)
  • Excellent abrasion resistance
  • Low coefficient of friction
  • Chemical resistance
  • Little or no moisture absorption
  • Easy to machine
  • Reduced maintenance costs and energy consumption
  • Highly resistant to corrosive chemicals (except oxidizing acids)

Technical

Typical Physical Properties:

Density: 0.034 lb/in3

Specific Gravity: 0.93

Water Absorption @ 24 hours: 0%

Tensile Strength: 3,100 Psi

Tensile Modulus: 125,00 psi

Flexural Modulus: 125,00 psi

Relatvie Volumetric Abrasion Loss: 100

Compressive Strength: 2,000

Izod Impast (Notched), ft-lb/in: No Break

Shore D Hardness: D62-D66

Coefficient of Thermal Expansion: 11 10-5/°F

Heat Deflection Temperature 2 264 psi: 203ºF

Melting Point: 280°F

Continuous Service Temperature (Operating): 180°F

Flammabilty Rating: HB

Volume Resistivity: 1018 Ohm/cm

Dielectric Constant: 2.3-2.35 103 Hz

Dielectric Strength: 900 KV/mm

Arc Resistance: 250-350 sec

Dissipation Factor at 1 kHz: 0.0002

 

 

View AllClose