SCIGRIP IPS Weld-On #3061 - Low VOC Thinner For Weld-On 40

SCIGRIP IPS Weld-On #3061 – Low VOC Thinner For Weld-On 40

Write a Review
SKU N/A Categories ,

$35.31

Weld-On 3061 is a clear thinner to be used as a reactive diluent for Weld-On 40A only. This product is specifically formulated to adjust the viscosity of Weld-On 40A adhesives without compromising its adhesive properties or curing performance. Weld-On 3061 provides a water-thin consistency, making it easier to handle and apply for precision applications.

Technical

Technical Specifications

Technical Data Sheet (TDS)

Adhesive Properties and Characteristics @ 73°F (23°C):

ColorClear
ViscosityWater Thin
VOC Content<50 g/l mixed
Specific Gravity0.944 ± 0.01

Shelf Life:

Two years in tightly sealed containers. Stability depends on the integrity of the container and the evaporation of the solvent when exposed to air.

Directions

Directions for Use

  • DO NOT dilute by more than 10% by weight or volume. Excessive dilution may adversely affect cure times or adhesive properties of Weld-On 40A.
  • Add Weld-On 3061 to the mixed Weld-On 40A adhesive and stir gently, avoiding the introduction of air bubbles.
  • Let the mixture stand for 1-2 minutes to allow trapped air to escape for a smoother application.

Application Tips:

  • Ensure the work environment is well-ventilated.
  • Use clean tools to mix and apply the product for best results.
  • Dispose of any unused mixture according to local regulations.

Safety

Safety Information

Proper handling and storage are crucial to ensure the safe use of Weld-On 3061. Please refer to the following resources for detailed safety information:

Safety Data Sheet (SDS)

Precautions:

  • Wear gloves and safety goggles to protect your skin and eyes during application.
  • Avoid inhaling fumes. Use the product in a well-ventilated area or with respiratory protection if necessary.
  • Keep away from open flames or heat sources, as the solvent is flammable.
  • Store in a cool, dry place, and tightly seal the container when not in use.
  • Keep out of reach of children and pets.

Applications

Applications

  • Used as a reactive diluent for Weld-On 40A adhesive applications.
  • Ideal for adjusting viscosity for intricate bonding or repairs.
  • Enhances the application process for precision projects in acrylic fabrication.
  • Works well for projects requiring bubble-free and transparent adhesive joints.

Write a Review