Adhesives

ACRIFIX® 1S 0107 Quick Set Solvent Cement is a thin-bodied (has the consistency of water) and particularly quick drying solution. Solvent Based Cement Fast curing adhesive Ideal for high volume production ACRIFIX® Solvent Cements offer both...

Weld-On 66 is a clear, light bodied, fast drying solvent cement. It is used as a contact cement, providing instant, high strength which will increase as solvent dissipates. The longer the open time (5 to 10 min) and with sufficient assembly pressure, the...

ACRIFIX® 1S 0116 Pure-V Solvent Cement is a viscous adhesive that is free of dichloromethane (methylene chloride). While it is translucent, it applies as colorless to light yellow and produces a crystal-clear solvent cement, which allows for...

The Syringe applicator gives the same even capillary control as the Plasticator, but also offers calibrated accuracy. Easy to fill and to replace needles.

Weld-On 2007 is a clear, water-thin, fast drying solvent. It may be applied by brush, syringe, spray, and most any other method. It forms bonds by the softening and fusion of the two surfaces in contact. Bonds made with Weld-On 2007 cure rapidly. Cure is...

Weld-On 4707 is a milky, syrupy, bodied, fast drying solvent cement. The bonds formed are high strength, rigid and generally free from crazing. Chemical, physical, and electrical properties are similar to those of ABS materials. Cure is affected by...

For use with Craftics Plasticators (bottles and syringes)

Weld-On 4052 is a clear, medium bodied, fast set solvent cement. The cement appears to have a slight amber tint when viewed in the container, however, the usual thin layer on the substrate appears clear when dry. Substrate Recommendations Weld-On 4052 is...

Weld-On 4784 is a clear, thin to medium bodied solvent cement. It cures rapidly with the dissipation of the solvent at room temperature resulting in a very strong, but flexible bond. The bond for Weld-On 4784 forms very quickly, so that some parts may be...

Weld-On 1829 is a medium bodied, water-resistant, modified elastomer and light tan in color. It is a part solvent cement which cures with the dissipation of solvent to a very tough flexible film. It forms strong joints with rigid materials, but affords...

Weld-On 3061 is a clear thinner to be used as a reactive diluent for Weld-On 40A only. Technical Technical Data Sheet (TDS) Adhesive Properties and Characteristics @ 73°F (23°C) Color Clear Viscosity Water Thin VOC...

Weld-On 58 is a fast curing, clear colorless, two-component, 100% reactive polyurethane adhesive that contains no volatile organic compounds (VOC). When mixed and applied, it polymerizes at room temperature to form high bonds within a few hours. The...

Weld-On 1707 is a milky, syrupy, medium bodied, fast drying solvent cement. It forms high strength bonds in joining ABS materials. The properties of its bonds are high strength, rigid, generally free from crazing. Chemical, physical, and electrical...

For use with Weld-On 16 and 4784 tubes

Weld-On 1802 is a clear, thin bodied, medium set, solvent cement. It cures with the dissipation of solvents forming strong, water resistant, clear joints. Initial bonds form very quickly. Depending on size and conditions, some parts may be handled within...

SC-325 is the simplest method of joining Polycarbonate to itself or some dissimilar materials.  SC-325 has an anti-blush agent in it, but you may still experience blushing under certain conditions such as high humidity.  Because of its...