SC-94 is a medium to fast setting cement for acrylics. It is water-thin, evaporates slower than SC-125, and flows in the joints easier, achieving a more bubble-free joint. The bond is slower than SC-100 and SC-125, but the initial bond will form in a matter of minutes, and a strong bond will form within hours. SC-94 is highly recommended when bonding extruded acrylic or in high humidity conditions. Solvent cementing depends on the intermingling of the two surfaces to be joined so that there is actual cohesion, as in the material itself. After assembly, the solvent evaporates or dissipates through the material and a hard, clear joint is obtained. The choice of cementing technique will depend on the type of joint to be cemented. Should be applied with a syringe or applicator bottle.